| PROJECT: Houghton-Wood Cottage
CLIENT: Royal Sun Aliance
CONTRACT OVERVIEW: Helifix installallation
SCOPE OF WORKS:
- Gain access to area of work via tower scaffold.
- Relevant COSHH assessments to be consulted before any repair products are used.
- Grind out or drill slots as appropriate to accommodate Helifix reinforcements.
- Vacuum out drill holes to remove any dust traces.
- Grout in reinforcement leaving neat joint.
- Install Helifix Masonry Beams to damaged corner with LB04, up to 16LM.
- Install 500mm Helifix Cem Ties to the identified areas on the rear elevation to vertical cracking at corner junction as per manufacturers recommendations.
- Fill gaps using epoxy mortar, this will re-secure the area.
- Rake out the mortar joints, flush out and well wet joints to introduce Helifix Helibeam crack stitching system up to 6LM.
- Upon completion, re-point all brickwork where Helix works were undertaken in a mortar mix to match existing as close as possible.
- Internally, remove defective plaster and re-plaster over EML to ground floor main room only.
- Apply two coats of masonry paint to garage walls.
STATUS: Principal contractor
VALUE: £4k
|
