Quadriga

Houghton-Wood Cottage

CLIENT: Royal Sun Aliance

CONTRACT OVERVIEW: Helifix installallation

SCOPE OF WORKS:

Gain access to area of work via tower scaffold.
Relevant COSHH assessments to be consulted before any repair products are used.
Grind out or drill slots as appropriate to accommodate Helifix reinforcements.
Vacuum out drill holes to remove any dust traces.
Grout in reinforcement leaving neat joint.
Install Helifix Masonry Beams to damaged corner with LB04, up to 16LM.
Install 500mm Helifix Cem Ties to the identified areas on the rear elevation to vertical cracking at corner junction as per manufacturers recommendations.
Fill gaps using epoxy mortar, this will re-secure the area.
Rake out the mortar joints, flush out and well wet joints to introduce Helifix Helibeam crack stitching system up to 6LM.
Upon completion, re-point all brickwork where Helix works were undertaken in a mortar mix to match existing as close as possible.
Internally, remove defective plaster and re-plaster over EML to ground floor main room only.
Apply two coats of masonry paint to garage walls.

STATUS: Principal contractor

^ Top

Previous page: Contact Us